Stop Bird Attack

STOP BIRD ATTACK

1. 1. If Stop Bird Attack has been exposed to freezing conditions, allow sufficient time to thaw prior to use. Container must be kept at room temperature (70°F/21°C) for several hours before spraying.
2. Apply several light coats rather than one heavy coat. Allow drying time between coats. Drying time will depend upon the thickness of the coating and the ambient temperature and humidity but may require several hours.
3. To apply Stop Bird Attack, hold can upright 12 to 18 inches from surface to be sprayed. Point valve opening toward surface and press. For small flakes, move the can closer to the surface until desired effect is achieved. For larger flakes, move the can away from the surface to be sprayed.
4. After spraying, turn can upside down and depress valve for several seconds to clean out spray left in nozzle.
5. Avoid spraying on furniture, woodwork, walls, curtains, rugs, and tinted film on window surfaces. Dry Stop Bird Attack can be cleaned up with a brush, broom, or vacuum.
6. To remove Stop Bird Attack from windows, spray with a garden hose. Or, spray glass generously with glass cleaner. Allow to soak for 30 seconds. Remove with a squeegee or with a paper towel.